Specifications
CATHODE RAY TUBE :
6 inch diagonal, rectangular screen with internal graticule 8 x 10
DIV ( 1 DIV = 1 cm ). P31 phosphor, 2.1kV accel voltage.
VERTICAL AMPLIFIERS ( CH I 1 and CH 2 )
Sensitivity :
5 mV / div to 5 V / div ( X1 mode ).
1 mV / div to 1 V / div ( X5 mode ).
1-2-5 sequence, 10 step attenuator. Vrnier control provides fully adjustable attenuation between steps.
Accuracy : +/- 3% ( X1 mode ). +/- 5% ( X5 mode )
Input Resistance : 1 M Ohm +/- 2 %
Input Capacitance : 25 pF +/- 10 pF
Frequency Response :
5 mV to 5 V / div (CAL.):DC to 20 MHz (-3dB)
1 mV / div (CAL.):DC to 5 MHz (-3dB)
Rise Time : Approximately 17.5ns.
Operating Modes : CH 1.CH 2.ALT. CHOP. ADD.
Polarity Reversal (lnvert) : CH 2 only.
Maximum Input Voltage : 400 V dc + ac peak.
Maximum Undisturbed Amplitude
DC-to-20- MHz: 4 divisions.
DC-to-10- MHz: 8 divisions.
HORIZONTAL AMPLIFIER ( Input through channel input )
X-Y mode : switch selectable using X-Y switch.
CH 1:X axis.
CH 2:Y axis.
Sensitivity : 1mv/div to 5v/div
Accuracy : Y-Axis: +/- 3%;X-Axis: +/- 6%
Input Impedance : 1M Ohm //25PF
Frequency Response : DC to 1 MHz typical (-3dB).
X-Y Phase Difference:Approximately 3o at 50 KHz.
Maximum Input Voltage : 400Vdc+ac pack
SWEEP SYSTEM
Sweep Speed :
0.1 us / div to 0.5 s / div in 1-2-5 sequence, 21 steps.
Vernicr control provides fully adjustable sweep time between steps.
Accuracy : +/-3%
Sweep Magnification : 10x, +/- 6% ( 0.1 us and 0.2 us ranges uncalibrated when X10 is engaged ).
Holdoff:Continuously adjustable from NORM to 5 times normal.
TRIGGERING
Trigger Modes : AUTO ( free run ) or NORM
Trigger Source : CH 1, CH 2, ALT, EXT, LINE.
Maximum External Trigger Voltage : 300 V dc + ac Peak
Trigger Coupling :
AUTO(AC):30 Hz to 30 MHz
TV-H(AC):Used for triggering from horizontal sync pulses.
TV-V(DC): Used for triggering from vertical sync pulses.
DIGITAL STORAGE FACILITIES
Memory : 2K words per channel(2 x 2048 x 8 bit)
Maximum Sampling Rate : 1000MHz/sec( Equivalent 0.1"us/div )
Vertical Resolution : 8 Bit (25 Levels/div)
Vertical Accuracy :
5mV/div - 5V/div: +/- 3%
1mV/div: +/- 5%
Horizontal Resolution : 2048 points for 10 div.
DSO Timebase : 0.1 us/div to 0.5s/div(21 Range).
Accuracy : +/- 3% ( 0.1 us and 0.2 us range Uncalibrated )
Slow : x100.10ms/div ~ 0.5s/div ( 6 Range). extern to 50s/div.
Equivalent Mode Range : 50 ns/div to 0.1us/div ( 9 Range )
Equivalent Mode Bandwidth : 20 MHz ( -3dB )
Roll Mode Range : 0.5s/div to 10 ms/div ( 6 Range).x 100 extend to 50s/div.
Real Time Sampling Rate : 10 MHz/sec.
Operating Mode : Roll. Save ALL. Save CH 2. X-Y. Single.Pre-Trig( 0%.25%.50%.75% ) Plot out.
CH1 out put : 0.2 V/div
CH2 out put : 0.2V/div
Plot : 1 / 10 of time/div setting.
Trace Rotation : Electrical, front panel adjustable.
Power Requirements : 115/230VAC +/- 10%, 50 / 60 Hz,approximately 60 W.
Dimensions : 324 x 132 x 398 mm (12.8 x 5.2 x 15.6 in).
Weight : Approximately 8.5kg (18.7 lbs).
C E STANDARD :
E.M.C. Regulations-1992 ( E.C.Directive 89/336/EEC )
EN 50081-1 Emissions.
EN 50082-1 limmunity.
6 inch diagonal, rectangular screen with internal graticule 8 x 10
DIV ( 1 DIV = 1 cm ). P31 phosphor, 2.1kV accel voltage.
VERTICAL AMPLIFIERS ( CH I 1 and CH 2 )
Sensitivity :
5 mV / div to 5 V / div ( X1 mode ).
1 mV / div to 1 V / div ( X5 mode ).
1-2-5 sequence, 10 step attenuator. Vrnier control provides fully adjustable attenuation between steps.
Accuracy : +/- 3% ( X1 mode ). +/- 5% ( X5 mode )
Input Resistance : 1 M Ohm +/- 2 %
Input Capacitance : 25 pF +/- 10 pF
Frequency Response :
5 mV to 5 V / div (CAL.):DC to 20 MHz (-3dB)
1 mV / div (CAL.):DC to 5 MHz (-3dB)
Rise Time : Approximately 17.5ns.
Operating Modes : CH 1.CH 2.ALT. CHOP. ADD.
Polarity Reversal (lnvert) : CH 2 only.
Maximum Input Voltage : 400 V dc + ac peak.
Maximum Undisturbed Amplitude
DC-to-20- MHz: 4 divisions.
DC-to-10- MHz: 8 divisions.
HORIZONTAL AMPLIFIER ( Input through channel input )
X-Y mode : switch selectable using X-Y switch.
CH 1:X axis.
CH 2:Y axis.
Sensitivity : 1mv/div to 5v/div
Accuracy : Y-Axis: +/- 3%;X-Axis: +/- 6%
Input Impedance : 1M Ohm //25PF
Frequency Response : DC to 1 MHz typical (-3dB).
X-Y Phase Difference:Approximately 3o at 50 KHz.
Maximum Input Voltage : 400Vdc+ac pack
SWEEP SYSTEM
Sweep Speed :
0.1 us / div to 0.5 s / div in 1-2-5 sequence, 21 steps.
Vernicr control provides fully adjustable sweep time between steps.
Accuracy : +/-3%
Sweep Magnification : 10x, +/- 6% ( 0.1 us and 0.2 us ranges uncalibrated when X10 is engaged ).
Holdoff:Continuously adjustable from NORM to 5 times normal.
TRIGGERING
Trigger Modes : AUTO ( free run ) or NORM
Trigger Source : CH 1, CH 2, ALT, EXT, LINE.
Maximum External Trigger Voltage : 300 V dc + ac Peak
Trigger Coupling :
AUTO(AC):30 Hz to 30 MHz
TV-H(AC):Used for triggering from horizontal sync pulses.
TV-V(DC): Used for triggering from vertical sync pulses.
DIGITAL STORAGE FACILITIES
Memory : 2K words per channel(2 x 2048 x 8 bit)
Maximum Sampling Rate : 1000MHz/sec( Equivalent 0.1"us/div )
Vertical Resolution : 8 Bit (25 Levels/div)
Vertical Accuracy :
5mV/div - 5V/div: +/- 3%
1mV/div: +/- 5%
Horizontal Resolution : 2048 points for 10 div.
DSO Timebase : 0.1 us/div to 0.5s/div(21 Range).
Accuracy : +/- 3% ( 0.1 us and 0.2 us range Uncalibrated )
Slow : x100.10ms/div ~ 0.5s/div ( 6 Range). extern to 50s/div.
Equivalent Mode Range : 50 ns/div to 0.1us/div ( 9 Range )
Equivalent Mode Bandwidth : 20 MHz ( -3dB )
Roll Mode Range : 0.5s/div to 10 ms/div ( 6 Range).x 100 extend to 50s/div.
Real Time Sampling Rate : 10 MHz/sec.
Operating Mode : Roll. Save ALL. Save CH 2. X-Y. Single.Pre-Trig( 0%.25%.50%.75% ) Plot out.
CH1 out put : 0.2 V/div
CH2 out put : 0.2V/div
Plot : 1 / 10 of time/div setting.
Trace Rotation : Electrical, front panel adjustable.
Power Requirements : 115/230VAC +/- 10%, 50 / 60 Hz,approximately 60 W.
Dimensions : 324 x 132 x 398 mm (12.8 x 5.2 x 15.6 in).
Weight : Approximately 8.5kg (18.7 lbs).
C E STANDARD :
E.M.C. Regulations-1992 ( E.C.Directive 89/336/EEC )
EN 50081-1 Emissions.
EN 50082-1 limmunity.
