Stream ALPHA Plus PCI-E is designed to work with Composite or S-Video by-pass signal whether using PAL, SECAM or NTSC. Stream ALPHA Plus has all-digital image formation chain which guarantees perfect quality of generated signal and its better binding to the input signal.

The board overlays graphics over live video signal using alpha-channel that allows setting the transparency level of each pixel of the image and changing it while playing.

Stream ALPHA Plus PCI-E is equipped with internal synch generator that switches on automatically if the input signal is missing. If computer power supply is switched off or BYPASS mode is activated, the output is directly connected to the input through relay contacts, and 75 Ohm load on the board is disconnected. The board can overlay computer graphics over video signal whether inside itself or on the external mixer. To work with external mixer the board has a special KEY output. It is possible to switch on/off multiplication of generated image by alpha-channel.

In addition to the common for Stream ALPHA boards analog mixing performed without any delay, the board has digital mode that enables decoding of the input video signal. The decoding and subsequent coding delays the video signal (about 10 mks). Digital mixing makes it possible to change standards of output signal relative to input signal (PAL<->SECAM, CVBS<->S-Video). Besides, it allows decreasing requirements to the quality of input signal, keeping the high quality of output signal. Composite signal is decoded using color combine filter to divide brightness and chrominance.

The possibility of grabbing and hardware scaling of video signal from the board's inputs allows changing the size of incoming video and overlay titles in BY-PASS mode using minimal resources of central processor.

Due to the usage of PCI-Express bus on Stream ALPHA Plus Express, interface and board bandwidth enables overlaying full screen titles through alpha channel and grabbing input video signal at the same time.

All the graphics generated by the card passes through the active digital filter. It is possible to enable/disable the insertion of the sync into the "Green" signal of the component output and alpha-channel. Component YUV output and alpha-channel (Key) output allows working with the mixer, that has appropriate input and DSK input.

Compatible Software:
- Alpha Pro 2.0
- TELE 2.2
- TELE 2.2 Info
- Title Box