Sensor block:

Image device : 1/2-type progressive scan IT monochrome CCD
Effective resolution (H x V) : 1,280 x 1,024 (SXGA)
Cell size (H x V) : 4.65 x 4.65 µm
Frame rate : 15 fps (SXGA)
Gain control : Manual (0 to +18 dB, 1 dB steps)

Electronic shutter :
2 to 1/50,000 s (trigger mode),
2 to 1/100,000 s (free run mode)

Binning function : Vertical / Horizontal binning

Partial scanning function :
Vertical random scanning 32 to 1,024 lines, 32 line steps
Horizontal random scanning 384 to 1,280 pixels, 128 pixel steps
Typical frame rate 34 fps (VGA), 21 fps (XGA)
External trigger input pulse-edge detection mode/pulse-width detection mode

Trigger delay function : 0 to 4 s, 1ms steps
External trigger latency : less than 10 us
Hardware Look Up Table : Gamma compensation, binarization, negative/positive reverse, etc.

Processor:

CPU : x 86, AMD Geode GX533, 400 MHz
Memory :
128 MB DDR-SDRAM
128 MB Compact Flash

Operating systems : Monta Vista Linux Professional edition 3.0, Microsoft Windows embedded

Interfaces:

Ethernet : 10Base-T/100Base-TX (Network protocols: TCP/IP (IPv4), HTTP, FTP)
Monitor output : D-sub 15pin for multi scan monitor
USB : version 1.1
Serial interface : RS-232C
Digital I/Os : TTL IN/OUT, Isolated IN/OUT, Trigger IN, Exposure OUT

General:

Lens mount : C-mount
Minimum illumination : 4 lx (F1.4, +18 dB gain)
Power consumption : 7.8 W
Power requirements : 10.5 to 26.4 V
Operating temperature : -5 to +45 oC (23 to 113 oF)
Storage temperature : -30 to +60 oC (-22 to +140 oF)
Operating humidity : 20 to 80% non condensing
Storage humidity : 20 to 95% non condensing
Vibration : 10 G (20 to 200 Hz)
Shock resistance : 70 G
Regulations : FCC / CE / IC / VCCI Class A

Lens mount cap
Sony XCI-SX1 manual