Features
The AMS-160 features two 26-segment LED level meters showing simultaneous VU & PPMfor accurate level-metering. Extensive magnetic shielding allows placement immediately adjacent to video monitors with no color impurities.
1RU rack unit high
2 SDI inputs (selectable group & sub-group)
2 balanced analog inputs (1 stereo)
2 reclocked SDI outputs;
User selectable input sources
1 composite analog video output
Two 26-segment tri-color level meters displaying simulatneous VU & PPM
2 speakers
Headphone jack, muted speakers
Volume and balance control
Quick and simple installation
Specifications
Serial Digital Video Input (only for AMS160-D2 or AMS160-DA2)
Quantity 2
Standards 259M-C 270 Mb/s; 525/625 auto sensing
Connector BNC per IEC 169-8
Impedance 75 ohms
Return Loss >18 dB to 270MHz
Signal Level 800mV +/-10%
Equalization Auto EQ to 300m
Serial Digital Video Output (only for AMS160-D2 or AMS160-DA2)
Quantity 2
Standards 259M-C 270 Mb/s; auto sensing
Connector BNC per IEC
Impedance 75 ohms
Return Loss >18 dB to 270MHz
Signal Level 800mV +/-10%
DC Level 0.0 V +/-0.5 V
Overshoot < 10% of amplitude (all outputs terminated)
Rise and Fall Time 0.4 to 0.8ns(20% to 80% of amplitude)
Jitter <500ps
Composite Analog Video Output (only for AMS160-D2 or AMS160-DA2)
Quantity 1
Standards NTSC, PAL-B
Impedance 75 ohms
Return Loss >40 dB to 5.75MHz
Quantizing 8 bits
Frequency Response +/-0.25dB to 5MHz
Differential Gain <1.5%
Differential Phase <1.2o
DC Offset +/-50mV
Chroma/
Luma Delay <10ns to 5MHz
Chroma/
Luma Gain +/-1.5%
Transient Response <0.5% K Factor
Signal to Noise >54dB RMS to 5MHz
Analog Audio Input
Quantity 2
Sampling Rate 48KHz
Connector 3-pin connector
Input Operating Level +24,+20,+18,+12dBu
Impedance >36 Kohms
A/D Resolution 24-bit
Level Meters
Quantity 2
Display 26-segment
Scale 0 to -48dBFS(AES), +12dB to -50dB(VU)
Dynamics VU & PPM simultaneously
Level Meter Threshold 0 VU to -12/-18/-20/-24dBFS, DIP Switch Selectable
Midscale Resolution 2dB
Speaker Output
Quantity 1
Connector Stereo headphone jack
Power 150mW per channel in 32-ohm speakers shut-off on connection
Control
ALC/Manual Switch Yes, with display
ALC Gain Manual Gain -96dB to +12dB, 0.5dB step, with display
Gain Source Yes, Ch1/Ch2/Ch3 & Ch2
General Specifications
Magnetic Shielding <1 gauss any adjacent surface
Chassis Type 1RU, 19" rack mounting
Power Consumption <30W
Power Supply 100-240 VAC, 50/60Hz
Dimmensions
(HxWxD) 44.5x483x260m
