Specifications
Polar pattern: Omnidirectional, wide cardioid, cardioid, hypercardioid, figure eight
Sensitivity: 23 mV/Pa (-33 dBV) +/- 0.5 dB
Max. SPL: 200 / 400 / 800 / 1600 Pa = 140 / 146 / 152 / 158 dB (0 / -6 / -12 / -18 dB) for 0.5% THD
Equivalent noise level: 6 dB-A (0 dB preattenuation) (IEC 60268-4)
Signal/noise ratio: 88 dB
Preattenuation pad: -6 dB, -12 dB, -18 dB, switchable
Bass cut filter slope: 12 dB/octave at 40 Hz and 80 Hz; 6 dB/octave at 160 Hz
Impedance: <=200 ohms
Recommended load impedance: >= 2,200 ohms
Supply voltage: 48 V phantom power to DIN/IEC
Current consumption: approximately 4.5 mA
Dynamic range: 134 dB minimum
Connector: 3-pin XLR to IEC
Dimensions: 50 x 38 x 160 mm
Net weight : 300 g
Sensitivity: 23 mV/Pa (-33 dBV) +/- 0.5 dB
Max. SPL: 200 / 400 / 800 / 1600 Pa = 140 / 146 / 152 / 158 dB (0 / -6 / -12 / -18 dB) for 0.5% THD
Equivalent noise level: 6 dB-A (0 dB preattenuation) (IEC 60268-4)
Signal/noise ratio: 88 dB
Preattenuation pad: -6 dB, -12 dB, -18 dB, switchable
Bass cut filter slope: 12 dB/octave at 40 Hz and 80 Hz; 6 dB/octave at 160 Hz
Impedance: <=200 ohms
Recommended load impedance: >= 2,200 ohms
Supply voltage: 48 V phantom power to DIN/IEC
Current consumption: approximately 4.5 mA
Dynamic range: 134 dB minimum
Connector: 3-pin XLR to IEC
Dimensions: 50 x 38 x 160 mm
Net weight : 300 g
