Specifications
Picture
Type: a-Si TFT Active Matrix LCD
Resolution (pixels): 1280 x 768
Picture Size (H x W) (Viewable area) (Diagonal):
Approx. 369.6 x 221.8 mm
(Approx. 14 5/8 x 8 3/4 inches)
Approx. 431.1 mm (17 inches)
Aspect: 15:9
Colors: Approx 16,770,000 colours
Viewing Angle: 85o/85o/85o/85o (typical) (up/down/left/right contrast>10:1)
Inputs
Composite: BNC (x1), 1.0 Vp-p +/-3dB sync negative
Y/C:
Mini DIN 4-pin (x1)
Y: 1.0 Vp-p +/- 3dB sync negative
C: 0.286 Vp-p +/- 3dB (NTSC burst signal level), 0.3 Vp-p +/- 3dB (PAL burst signal level)
RGB, Component:
BNC (x3)
RGB : 0.7 Vp-p +/- 3dB (Sync On Green, 0.3 Vp-p sync negative)
Component : 0.7 Vp-p +/- 3dB (75% chrominance standard colour bar signal)
External Sync:
BNC (x1)
0.3 to 4.0 Vp-p +/- bipolarity ternary or negative polarity binary
Audio: Phono jack (x2) (L, R) -5 dBu 47 kilo ohms or higher
HD15:
D-sub 15-pin (x1), R/G/B: 0.7 Vp-p sync positive (Sync On Green, 0.3 Vp-p sync negative)
Sync: Total level (polarity free, H/V separate and composite sync)
Plug & Play function: corresponds to DDC-2B
DVI-D: TMDS single link
Parallel remote: Modular connector 8-pin (x1) (pin assignment at users' allocation)
Serial remote (LAN):
D-sub 9-pin (RS-232C) (x1), RJ-45 modular connector (ETHERNET) (x1) (10BASE-T/100BASE-TX)
DC in: XLR type 4-pin (x1) DC 12 V (output impedance 0.05 ohms or less)
Optional input slot: 2 slots (for HD-SDI, SDI capability and extra analogue I/O's)
Outputs
Composite: BNC (x1), Loop-through, with 75 ohms automatic termination
Y/C: Mini DIN 4-pin (x1) Loop-through, with 75 ohms automatic termination
RGB, Component: BNC (x3), Loop-through, with with 75 ohms automatic termination
External Sync: BNC (x1), Loop-through, with 75 ohms automatic termination
Audo monitor out: Phono jack (x2) (L, R)
Speaker (Built-in): 1 W + 1 W (stereo)
General
Power Requirement: AC 100 V to 240 V 50/60 Hz 0.8A to 0.4 A, DC 12 V, 5.7 A
Power Consumption: Maximum Approx. 77 W (with 2 x BKM-229X)
Operating Temperature: 0oC to 35oC (32oF to 95oF)
Recommended Operation Temperature: 20oC to 30oC (68oF to 86oF)
Operating Humidity: 30% to 85% (No condensation)
Storage & Transport Temperature: -20oC to +60oC (-4oF to +140oF)
Storage & Transport Humidity: 0% to 90%
Operating/Storage/Trans. Pressure: 700 hPa to 1060 hPa
Dimensions (W x H x D):
Without stand
439.5 x 284 x 105.0 mm (17 3/8 x 11 1/4 x 4 1/4 inches)
With optional stand
439.5 x 385.7 x 269.9 mm (12 5/8 x 14 3/8 x 10 3/4 inches)
Display Stand (W x H x D):
SU-561 (Option):, 320.0 x 364.0 x 269.9 mm (12 5/8 x 14 3/8 x 10 3/4 inches)
Mass:
Without stand and board
Approx. 6.3 kg (13 lb 14 oz)
With optional stand and boards
Approx. 8.8 kg (19 lb 6 oz) with BKM-229X (x2)
Type: a-Si TFT Active Matrix LCD
Resolution (pixels): 1280 x 768
Picture Size (H x W) (Viewable area) (Diagonal):
Approx. 369.6 x 221.8 mm
(Approx. 14 5/8 x 8 3/4 inches)
Approx. 431.1 mm (17 inches)
Aspect: 15:9
Colors: Approx 16,770,000 colours
Viewing Angle: 85o/85o/85o/85o (typical) (up/down/left/right contrast>10:1)
Inputs
Composite: BNC (x1), 1.0 Vp-p +/-3dB sync negative
Y/C:
Mini DIN 4-pin (x1)
Y: 1.0 Vp-p +/- 3dB sync negative
C: 0.286 Vp-p +/- 3dB (NTSC burst signal level), 0.3 Vp-p +/- 3dB (PAL burst signal level)
RGB, Component:
BNC (x3)
RGB : 0.7 Vp-p +/- 3dB (Sync On Green, 0.3 Vp-p sync negative)
Component : 0.7 Vp-p +/- 3dB (75% chrominance standard colour bar signal)
External Sync:
BNC (x1)
0.3 to 4.0 Vp-p +/- bipolarity ternary or negative polarity binary
Audio: Phono jack (x2) (L, R) -5 dBu 47 kilo ohms or higher
HD15:
D-sub 15-pin (x1), R/G/B: 0.7 Vp-p sync positive (Sync On Green, 0.3 Vp-p sync negative)
Sync: Total level (polarity free, H/V separate and composite sync)
Plug & Play function: corresponds to DDC-2B
DVI-D: TMDS single link
Parallel remote: Modular connector 8-pin (x1) (pin assignment at users' allocation)
Serial remote (LAN):
D-sub 9-pin (RS-232C) (x1), RJ-45 modular connector (ETHERNET) (x1) (10BASE-T/100BASE-TX)
DC in: XLR type 4-pin (x1) DC 12 V (output impedance 0.05 ohms or less)
Optional input slot: 2 slots (for HD-SDI, SDI capability and extra analogue I/O's)
Outputs
Composite: BNC (x1), Loop-through, with 75 ohms automatic termination
Y/C: Mini DIN 4-pin (x1) Loop-through, with 75 ohms automatic termination
RGB, Component: BNC (x3), Loop-through, with with 75 ohms automatic termination
External Sync: BNC (x1), Loop-through, with 75 ohms automatic termination
Audo monitor out: Phono jack (x2) (L, R)
Speaker (Built-in): 1 W + 1 W (stereo)
General
Power Requirement: AC 100 V to 240 V 50/60 Hz 0.8A to 0.4 A, DC 12 V, 5.7 A
Power Consumption: Maximum Approx. 77 W (with 2 x BKM-229X)
Operating Temperature: 0oC to 35oC (32oF to 95oF)
Recommended Operation Temperature: 20oC to 30oC (68oF to 86oF)
Operating Humidity: 30% to 85% (No condensation)
Storage & Transport Temperature: -20oC to +60oC (-4oF to +140oF)
Storage & Transport Humidity: 0% to 90%
Operating/Storage/Trans. Pressure: 700 hPa to 1060 hPa
Dimensions (W x H x D):
Without stand
439.5 x 284 x 105.0 mm (17 3/8 x 11 1/4 x 4 1/4 inches)
With optional stand
439.5 x 385.7 x 269.9 mm (12 5/8 x 14 3/8 x 10 3/4 inches)
Display Stand (W x H x D):
SU-561 (Option):, 320.0 x 364.0 x 269.9 mm (12 5/8 x 14 3/8 x 10 3/4 inches)
Mass:
Without stand and board
Approx. 6.3 kg (13 lb 14 oz)
With optional stand and boards
Approx. 8.8 kg (19 lb 6 oz) with BKM-229X (x2)