Audio-Technica AT875 Shotgun Microphone

DISCONTINUED
Audio-Technica AT875 Shotgun Microphone
The Audio Technica AT875 is a short shotgun condenser microphone that measures only seven inches in length and exhibits the sound quality and performance of larger, higher-priced shotgun microphones. The AT875 addresses the needs of videographers who prefer a short microphone that stays out of the frame, and efficiently rejects off-axis noise.

The smooth, natural audio reproduction captures every detail while a tailored low frequency response controls unwanted low frequency noise. The rugged AT875 operates on 11 to 52V phantom power, and a standard XLR output integrates seamlessly with some of the smaller professional cameras.

Specifications

Element : Fixed-charge back plate, permanently polarized condenser
Polar pattern : Line + gradient
Frequency response : 90-20,000 Hz
Open circuit sensitivity : -30 dB (12.5 mV) re 1V at 1 Pa
Impedance : 100 ohms
Maximum input sound level : 127 dB SPL, 1 kHz at 1% T.H.D.
Dynamic range (typical) : 107 dB, 1 kHz at Max SPL
Signal-to-noise ratio : 74 db, 1 kHz at 1 Pa
Phantom power requirements : 11-52V DC, 2 mA typical
Weight (microphone) : 2.8 oz. (80 g)
Dimensions : 6.89" (175.0 mm) long, .83" (21 mm) diameter
Output connector : Integral 3-pin XLRM-type
Audio-Technica case style : SG4

In the Box

AT8405a stand clamp for 5/8"-27 threaded stands
5/8"-27 to 3/8"-16 threaded adapter
protective carrying case

Reviews

Compatible Products