Sony ECM-MS2 Stereo Electret Condenser Microphone

by Sony
DISCONTINUED
Sony ECM-MS2 Stereo Electret Condenser Microphone
The Sony ECM-MS2 Stereo Electret Condenser Microphone is designed for mounting on professional camcorders equipped with 2 XLR inputs and phantom powering. The microphone also delivers good sound performance in field and studio production applications. The MS microphone signal of the ECM-MS2 microphone is internally decoded, and provides L and R (stereo) outputs. The MS2 stereo microphone also supports mono operation by simply unplugging the right channel (disabling phantom power from the right channel XLR connector).

Specifications

Frequency Response - Stereo : 80 to 20,000 Hz
Directivity : Unidirectional
Output Impedance : 30 Ohm +/-20%, balanced
Sensitivity Stereo: -32 dB (deviation +/-3 dB) 1
Signal-to-Noise Ratio :69 dB or more (IEC 179 A-weighted, 1 kHz, 1 Pa)
Noise -
Inherent : 25 dB SPL or less
Wind :
45 dB SPL or less (with windscreen)
65 dB SPL or less (without windscreen)
Induction : 0 dB SPL/1 x 10-7 T (1 mG) or less (from external magnetic field)
Maximum Sound Pressure Level (SPL) : 125 dB SPL or more
(input level for 1% waveform distortion at 1 kHz, converted into equivalent input sound pressure level)
Dynamic Range : 100 dB SPL or more
Operating Temperature : 0 to 50oC (32 to 122oF)
Storage Temperature : -20 to 60oC (-4 to 140oF)
Type - Back electret condenser microphone
Stereo: MS (Mid-Side) stereo microphone
Power Supply : External power supply of 40 to 52 VDC (IEC 61938 P48)
Power Consumption - Stereo : 3 mA or less x 2 Channel
Output Connector : 2x Cannon XLR-3-12C type
Dimensions : 24 x 137 mm (0.96 x 5.5 in)
Weight : 160 g (Approximately 5.6 oz)

In the Box

Windscreen
Cable Tie
Operating Instructions

Reviews