Sound Devices PIX 220i Video Recorder

DISCONTINUED
Sound Devices PIX 220i Video Recorder
File-Based A / V Recorder & Player
HDMI Video / XLR Audio Inputs & Outputs
Records in ProRes / DNxHD up to 220 Mbps
8- and 10-Bit Color
Plays Back in QuickTime
32 Ch of Audio Simultaneously with Video
Stores to SSDs or CompactFlash Drives
Hardware-Based Up/Down/Cross Conversions
5-Inch 800 x 480 Glossy IPS Display
Supports L-Series Batteries

Specifications

HDMI I/O :
1x 1.4a HDCP-enabled input
1x 1.3a output
Video Input Resolutions / Rates :
1080p23.976/24/25/29.97/30
1080i50/59.94/60
1080PsF23.976/24/25/29.97/30
720p50/59.94/60
576i50 (PAL)
480i59.94 (NTSC)

Video Codecs and Files :
Apple ProRes 36, 100, 145, 220 Mb/s, 8- and 10-bit
Avid DNxHD 36, 100, 145, 220 Mb/s, 8- and 10-bit
QuickTime wrapper (.MOV), UDF File System

Up/Down/Cross Conversion : 480i, 576i, 720p, 1080i, 1080p to any 480i, 576i, 720p, 1080i, 1080p
Frame Rate Conversion : 24, 25, 30, 50, 60 to 24, 25, 30, 50,60, 23.976, 29.97, 59.94 to 23.976, 29.97, 59.94, automatic 3:2 pull-down removal in 23.976 and 24 frame modes, other pull-down cadences include 2:2:2:4, 2:3:3:2, 3:2:3:2:2, and 2:2

Display :
5" diagonally (12.7 cm)
IPS display, glossy, 800 x 480 resolution

Audio Recording :
4 channels record/playback, simultaneous with video
Analog or HDMI selectable per channel

Analog Audio :
2 balanced, mic- or line-level inputs on 3-pin XLR (48 V phantom switchable)
2 balanced, line-level outputs on 5-pin XLR
Frequency response: 10 Hz - 20 kHz, +/- 0.5 dB re 1 kHz
THD + Noise: 0.004% max (1 kHz, 22 Hz - 22 kHz)
Input and Output Topology: fully electronically balanced, line-level, RF, ESD, short, and overload protected; pin-2 hot, pin-3 cold
Line Output Clipping Level: +18 dBu
Output Attenuation 0-20 dB, 1 dB increments
Headphone, 1/8" with gain control

Digital Audio :
Sampling Rate / Bit Depth: 48 kHz, 24-bit
Accepts 32k, 44.1k, 48k, 96k, 192k sample rates with SRC at input
HDMI: 2 channels embedded HDMI input, 8 channels embedded HDMI output
Accepts 32k, 44.1k, 48k, 96k, 192k sample rates

File Storage : PIX-CADDY mounted drive or eSATAp-connected drive: Sound Devices approved 2.5" (6.3 cm) drive
CompactFlash card : Sound Devices approved CF card
eSATAp supplies 5V @ 2A

Sync Output : Analog bi-, tri-level sync / genlock
Wordclock (square wave, 48 kHz sampling rate, 3.3 vp-p, 75 ohm)

Sync Input : Analog bi-, tri-level sync / genlock
Wordclock (square wave, 48 kHz sampling rate, 3.3 vp-p, 75 ohm)

Control :
Record triggering via SMPTE timecode
LANC or GPIO on 2.5 mm jack

Keyboard : USB host; keyboards without hubs acceptable
Power : 4-pin Hirose, 10-18 VDC, pin-1 (-) pin-4 (+)
Operating Temperature : 14 to 104oF (-10 to +40oC)
Dimensions : 14 x 10 x 6 cm (5.5 x 4 x 2.4 in)
Weight : 0.91kg (2 lb)

In the Box

AC Adapter
Sound Devices PIX 220i Manual

Reviews

Compatible Products