Sound Devices PIX 240i Video Recorder with Timecode

DISCONTINUED
Sound Devices PIX 240i Video Recorder with Timecode
File-Based A/V Recorder & Player
ProRes 4444 12-Bit 4:4:4 1080p Recording
5" IPS Monitor with 800x480 Resolution
3G-SDI / HDMI / Balanced XLR Audio
Uses CompactFlash or 2.5" SSD Media
Media Spanning and UDF Film Format
Letterbox, Crop, Anamorphic Conversion
Video Scaling & Frame Rate Conversion
3:2 Pulldown Removal
False Color, Zebra, Peaking, 1:1 Mapping

Specifications

Recording
Input Resolutions :
1080p23.976/24/25/29.97/30
1080i50/59.94/60
1080PsF23.976/24/25/29.97/30
720p23.976/24/25/29.97/30 (SDI Only)
720p50/59.94/60
576i50 (PAL)
480i59.94 (NTSC)

Recording Format :
QuickTime wrapper (.MOV), UDF File System
Apple ProRes 4:4:4 12-bit at 330 Mb/s
Apple ProRes 36, 100, 145, 220 Mb/s, 8- and 10-bit
Avid DNxHD 36, 100, 145, 220 Mb/s, 8- and 10-bit

Up/Down/Cross Conversion : 480i, 576i, 720p, 1080i, 1080p to any 480i, 576i, 720p, 1080i, 1080p

Frame Rate Conversion :
24, 25, 30, 50, 60 to 24, 25, 30, 50, 60, 23.976, 29.97, 59.94 to 23.976, 29.97, 59.94
Automatic 3:2 pull-down removal in 23.976 and 24 frame modes
Other pull-down cadences include 2:2:2:4, 2:3:3:2, 3:2:3:2:2, and 2:2

Audio Recording :
8 channels record/playback, simultaneous with video
Analog, HDMI or SDI, AES/EBU, selectable per channel

Analog Audio : Frequency Response: 10 Hz-20 kHz, +/- 0.5 dB re 1 kHz;
THD + Noise: 0.004% max (1 kHz, 22 Hz-22 kHz)
Input and Output Topology: fully electronically balanced, line-level, RF, ESD, short, and overload protected; pin-2 hot, pin-3 cold
Line Output Clipping Level: +18dBu
Output Attenuation 0-20 dB, 1 dB increments

Digital Audio :
Sampling Rate (bit depth): 48 kHz, 24-bit
AES/EBU: 4 channels in via XLR, 110 ohm, 2 V p-p.
Accepts 32k, 44.1k, 48k, 96k, 192k sample rates with SRC at input.
HDMI: 2 channels embedded HDMI input, 8 channels embedded HDMI output
Accepts 32k, 44.1k, 48k, 96k, 192k sample rates.
SDI: 8 channels embedded SDI input, 8 channels embedded SDI output, 48k sample rate

Timecode :
Modes Supported : Freerun, Record run, External
Frame Rates : 23.976, 24, 25, 29.97DF, 29.97ND, 30DF, 30ND
Accuracy : +/- 0.2ppm (accurate 2 hours after power is removed)

Interface
SDI Input & Output :
3G SDI
SMPTE 12M-1, 12M-2, 125M, 259M, 272M, 291M, 292, 296M, 299, 352M

HDMI Input & Output : Version 1.4a input, Version 1.3a output, HDCP enabled on input
Audio Input & Output : Balanced, mic- or line-level inputs on XLR with 48V phantom switchable (x2)
Balanced, line-level outputs on 5-pin XLR (x2)
HD-SDI or HDMI embedded audio
1/8" Headphone jack with gain control

File Storage :
PIX-CADDY mounted drive or eSATAp, Sound Devices approved 2.5" drive
CompactFlash card (Sound Devices approved CF card)
eSATAp supplies 5V @ 2A

Timecode Input & Output : BNC (LTC input and output), SDI or HDMI (Sony protocol), LEMO 5-pin

Sync Input & Output : Analog bi-, tri-level sync / genlock
Wordclock (square wave, 48 kHz sampling rate, 3.3 vp-p, 75 ohm)

Control : Record triggering via SMPTE timecode
LANC or GPIO on 2.5mm jack
Power : 4-pin Hirose, 10-18 VDC, pin-1 (-) pin-4 (+)

Display
Display Type : 5" LCD
Display Resolution : 800 x 480 resolution

Physical
Operating Temperature : 14 ~ 104o F (-10 ~ 40o C)
Dimensions : 14 x 10.2 x 6.1 cm (5.5 x 4 x 2.4 in)
Weight : 0.91 kg (2 lb)

In the Box

100-240 VAC Power Adapter
Sound Devices PIX 240i Manual

Reviews

Compatible Products