Receiver input source select could be from IR remote control or front panel button.
Built in RS232 distribution function, to send RS232 signal from one TX to multiple RX.
Supports 2-way RS232 commands at baud rate 115200 (control software on a PC, or other automated control system hardware) to control devices attached to the matrix using RS232. Full Duplex data communication.
HDMI 1.3b and HDCP compliant.
HDMI audio support up to LPCM 7.1@192Khz
Built in Bi-Directional analog audio transmission (only in point to point mode).
Built in Bi-Directional IR.
HKM01BT/DKM01BT/VKM03BT transmitter unit built in HDMI/DVI/VGA local loop output.
HKM01BR/VDKM01BR receiver unit with 4 ports USB devices (1 port USB 1.1 & 3 Port USB 2.0), to extend USB peripheral devices, such as flash disk, hard disk, keyboard, mouse, etc.
Use IGMP and Jumbo frame protocol Gigabit Switch Hub to do HD signal distribution and transmission.
Support point to point and multiple source devices to multi-display connections via Gigabit network switch.
The system could be mixable on TX/RX by HDMI (HKM01B), DVI (DKM01B), VGA (VKM03B) series products.
Perfect for large scale remote HD content access and security monitoring systems, digital signage applications.

Support Resolution : 480i / 480p / 720p / 1080i / 1080p @ 24Hz, 25Hz, 30Hz, 50Hz, 60Hz
Transmission Distance : CAT.5e: 150m / CAT.6: 180m (Max)
USB Connector : USB Type B x 1
RS232 Connector : DB9 (Female) x 1
Video Input : 15-pin Mini D-sub
Video Loop Output : 15-pin Mini D-sub
Link Connector : RJ45 x 1
Audio Connector : 3.5 mm Phone Jack x 2 (10K Ohm / 1Vpp)
IR Receiver (Internal) : 30-60Khz / +/-45o / 5M
IR Emitter (External) : 3.5mm Stereo Phone Jack
Power Supply : DC 5V 2A
Power Consumption : 750mA (Typical) / 1000mA (Max)

Temperature
Operation: 0 to 55oC
Storage: -20 to 85oC

Humidity: up to 95%
Dimensions mm : 167x105.5x40
Weight g : 460